How to Make a Breast Prosthesis for Swimming?

Author Tom Montero

Posted Jan 26, 2023

Reads 61

Close shot of football pitch

Making a breast prosthesis for swimming can be challenging but the result can be liberating. Numerous types of breast prostheses are available, but if you want to go swimming with a prosthesis, a specifically designed swim form is recommended.

Step One: Measurements.

First and foremost when making a breast prosthesis for swimming, take good measurements of your body. You should measure from your collarbone to the inframammary fold (near the crease below your breast) and around your chest at the fullest point of each breast. With these measurements it is very important to get sizing correct, as it is essential to keeping the prosthesis secure during activity.

Step Two: Choose Your Material.

You can find several materials for prostheses that are suitable for swimming; silicone is usually found in standard forms, however there exist more advanced options such as made-to-measure forms which can be molded to fit your unique body shape and size. It is important to select an appropriate material that will not break down or become saturated with water when submerged and can also maintain its shape while being resistant to drag on the surface of the water or ultraviolet rays while exposed in sunlight. Other materials such as foam can also offer an economical alternative when making a swimming form.

Step Three: Consider Supportive Accessories.

When making a swimming breast prosthesis, it may be necessary to use accessories like pockets or bra cups to ensure proper support and position of the form while swimming. A pocket may be attached directly to your bathing suit, which holds the form securely against your chest during activity in the water. Bra cups may also be used for extra support and protection from chlorine or saltwater damage on materials like silicone; however extra caution must be taken with foam forms due to their vulnerability over time when exposed regularly to pool water conditions like chlorine or other elements like jellyfish stings or saltwater scrapes.

With some careful preparation, creating an appropriate swim form for those living with mastectomy can feel liberating and empower those who want access back into enjoying activities such as swimming!

What materials do I need to create a breast prosthesis for swimming?

Creating a breast prosthesis for swimming can seem like a daunting task, however, with the right tools and materials it's actually quite simple to make. Before you buy or source any of the materials needed for this project, take into consideration that the prosthesis need to fit well and move with ease in the water.

The most important expansion on the supplies you'll need is the material for your main body piece, choose wisely as a proper material and fit are paramount. Boiled wool fabric makes an ideal base, given it is soft and can be soaked easily in hot water, so it will mold well to your individual shape. It's also very breathable so it won't heat up like some other fabrics often- used in making breast prostheses.

The next important component are the fittings; if buying adhesives and strapping be sure to select ones which do not contain chemical ingredients like latex or silicone as these may break down more easily when exposed to pool chemicals. Double-sided medical adhesive tape -which is designed for applications directly on skin -can help stabilize an area with less flexibility. If using clips or boning -a square plastic wire- pick pieces that offer just enough give but also hold their shape when wet.

In conclusion, these materials are essential when creating a breast prosthesis designed for swimming; boiled wool fabric for the main body piece, adhesives/strapping without harsh chemicals ingredients, double sided adhesive tape designed for applications directly on skin and clips/boning that give just enough give yet hold shape when wet.

Can the breast prosthesis be made from home resources?

Breast prostheses are an important part of many women's lives, allowing them to have the appearance of a natural breast in cases where the breast has been removed due to a mastectomy, or otherwise. Many questions arise regarding the materials used in these prostheses and whether or not one can make a prosthesis from home.

The short answer is no - it is not advisable for you to attempt to make your own breast prosthesis from home resources. This is because prostheses are typically made with very specific material which requires very precise measurements and levels of accuracy that cannot be adequately achieved outside of a professional manufacturing environment. Additionally, constructing such a device by yourself would come with potentially hazardous risks of injury due to lack of proper technique.

Fortunately, trained professionals are readily available to craft custom-made prostheses to meet your desired aesthetic specifications. They can also provide other important information such as where and how to wear it, as well as tips on choosing the right style and material for your body type. Professional manufactures also offer quality assurance - meaning your device will be made with only high quality materials that stand the test of time and wear. Even further more, the services are typically covered in full or partially by most health insurance policies in the United States - helping you offset any outlays during this process!

In conclusion, although it may be tempting to attempt making a breast prosthesis at home using readily available resources, it is much safer and cost-efficient option to visit a specialist who can craft this device just for you with guaranteed quality and safety standards met!

Are there specific measurements I should use for constructing a breast prosthesis for swimming?

When it comes to constructing a breast prosthesis specifically designed for swimming, it is critical to be mindful of specific measurements. The type of measures you should use will depend on the individual in question, as every person's size and shape can vary. Nonetheless, there are some general measurements that can be followed for creating a prosthesis that is balanced and comfortable for swimming.

When creating a custom swim prosthesis, you should start by considering the chest wall shape of the person who will be wearing it. This establishes the ideal size needed for the back piece; if possible it should fit snugly against the wearer's skin or body suit with no gaps. Additionally, when determining the cup size, it can be helpful to factor in two measurements: the circumference of their chest and their shoulders. These measurements will provide insight into whether a small or large cup is needed for optimal balance in the water. Different prostheses designs may also require additional measurements depending on body type, such as underbust circumference measurements and waist to mid-upper arm length measurements.

Overall, constructing a breast prosthesis specifically designed for swimming requires precision and careful measurement on an individual basis to ensure balance and comfort while in the water. Taking all relevant measurements into account when developing a swim prosthesis is fundamental to avoid frustration while exercising in water and getting maximum enjoyment from any water activity.

How do I support the breast prosthesis for swimming?

Swimming is an activity enjoyed by people of all ages, and it can serve as a powerful source of relaxation and even healing. It can also be a source of frustration for those with increased chest size or curvature due to breast cancer, mastectomy, mastitis or other related illnesses. Fortunately, there are numerous solutions to help support the breast prosthesis when in the water—from specialized bras to pocketed swimsuits and even swim caps.

The first consideration for those looking to support their breast prosthesis while in the water is whether they require extra support while swimming. Some find they don’t need any additional assistance—their chest is sufficiently supported by the prosthesis, breast forms and bandages already in place. However, if additional support is desired the next step would be to consider special swimwear which are specifically designed for this purpose. Pockets which can hold both a breast prosthesis and forms are available on many swimming suits, usually with some level of adjustability so one can ensure a comfortable fit. Additionally, suits designed primarily as swim shirts as opposed to full two-pieced costumes are ideal because they offer similar coverage with less fabric constriction.

Another option for those looking for added security while swimming is the use of specially formulated swim caps made of neoprene material with reinforced stitching for enhanced coverage across the chest area. When coupled with a pocketed suit one can achieve a secure fit without excess movement within their prosthesis while in the water. Finally many specially designed bras designed specifically to accommodate breast forms and prostheses are available that can provide more comfort during swimming than standard sports bras - these usually come complemented with specialties straps or adjustable fastenings so it can provide the necessary level of support when dynamic movements ensue during water activities such as swimming, snorkeling or diving.

All in all there are several ways which one can support their breast prostheses when engaging in aquatic activities - be it through lifestyle modification such as using specially designed pocketed suits or caps or via other means such as paired comfort undershirts or bras made specifically for this purpose. The key point here is that whatever solution you choose should offer adequate comfort and support giving you peace of mind during any aquatic activity without having to worry about your “equipment”!

What types of safety features should I consider when designing a breast prosthesis for swimming?

Swimming can be a joyous and liberating experience for those who have received a breast prosthesis, allowing them the comfort and freedom to be active in the water. Whether you’re swimming laps, taking part in a water aerobics class or simply floating, it is important to make sure your prosthetic is designed with safety features that will keep you and your prosthetic secure. Here are some key safety features to consider when designing a breast prosthesis for swimming.

Firstly, consider whether your chosen material is waterproof. This can help reduce drag in the water and eliminate the risk of bacteria or other contaminants entering the prosthetic, inducing infection. Silicone is often seen as the most suitable material for chlorinated water activity with breast prosthetics, as it is highly durable and non-porous, forming an impenetrable barrier from any foreign objects.

Secondly, an attachable back strap or harness system should be taken into account if going into deeper waters or participating in more vigorous activities such as surfing. You may also like to opt for an adhesive backing that holds securely against the chest wall. This helps keep the prosthesis firmly attached to the body so there’s no danger of it slipping off while entering or exiting the pool. It also offers greater security when performing dynamic strokes such as front crawl.

Finally, make sure any closures used on straps and backings are user friendly; opt for clips rather than ties which can loosen overtime when wet or become difficult to handle when wearing wet hands. Additionally look for straps with adjustable lengths so you can ensure optimum comfort during your activities; adjustable straps make it easier to customise each swim session according to different activity levels and preferences.

By taking into account these simple safety measures you can guarantee that you make every swim session an enjoyable one - without compromising your safety or style!

Are there any tips or techniques to help me make a breast prosthesis for swimming?

Swimming is a fantastic form of exercise that many people across the world enjoy. Unfortunately, some women who have undergone mastectomies to treat their breast cancer can feel uncomfortable engaging in swimming due to their inability to wear the required clothing. Fortunately, there are tips and techniques which can be used to help make a breast prosthesis that is specifically designed for swimming.

The first step in creating a breast prosthesis for swimming is to consider the type of swimwear being used and the desired level of coverage. Certain swimming costumes offer more coverage than others, such as one pieces or tankini tops with built-in shelf bras. Alternatively, some choose to cover up using rash guards and board shorts if they prefer full coverage. Regardless, it’s important to ensure adequate support when picking out these garments as they will play an important role in keeping the breast prosthesis firmly in place while swimming.

When creating a true swim prosthesis, medical grade silicone is your best bet as it remains light even when wet and offers some resistance against water compression - both of which make it ideal for swimming purposes. It's also important that extra care is taken during the measuring process in order for the prosthesis to provide an even balance of buoyancy for stability when treading water or gliding through the pool. Finally, it's crucial that all materials used are non-allergenic or else it could cause irritation when exposed to salt or chlorine-filled pools; If you're unsure about this aspect then perhaps seek guidance from your tailor or swimwear designer on materials suitable for your needs.

By following these tips and techniques you’ll be able to confidently make a secure and comfortable breast prosthesis that will enable you to make a splash (literally) at your local pool with ease!

Featured Images:

Profile photo of Tom Montero

Tom Montero

Writer at Ewpra

View His Articles

Tom Montero has always had a passion for writing. He started his career in journalism and eventually transitioned to content marketing. With over 15 years of experience in the industry, Tom has developed a unique perspective on creating engaging and effective content.

View His Articles